Internet the most used non-physical setup in the world. We all use the internet these days. It is part of daily life for most of the Mobile and computer users. The Internet helps us to live an easy and comfortable life in various ways. It could be like ordering food, booking a ticket and other things that we do in our daily life. Speed is one of the major concern that can affect the internet usage. No one wants to use the internet at low speed because it is frustrating and wastes users time. How to Increase Internet Speed Using cmd will give you the idea from which you can increase the internet speed at maximum bandwidth. There are various methods on how to boost internet speed.

In most cases, by default, the internet that we use given from the provider are not work at their maximum bandwidth. There are many possibilities which can lower or affect the internet speed. So to avoid those possibilities and to increase internet speed we have a few method that you may like. To experience the maximum internet speed make sure to have a computer system with great performance. Performance of any computer also affects the speed of the internet which we have to take care.

Why CMD

The article how to increase internet speed using cmd is based on cmd that you can easily see on the topic. CMD is the easy and fast way which gives a control to the user to increase internet speed by various methods. And also you don’t need any software to perform tricks on CMD. Using CMD you can also save your valuable time. So what do you think about using CMD to increase internet speed?

How to open CMD

We need to open the CMD in all the given methods. So here is the quick guide to open cmd. If you already know you can skip this process.

  • Right-click on Windows icon and then click on Command Prompt (Admin).
  • Or go to search bar and type cmd. Then you will see a cmd icon Right click on it and then Run as Administrator.

*Remember you have to open cmd as an administrator

To apply these tricks and tweaks on cmd you don’t need to have any programming knowledge. You have to just follow the given methods and you will see the increase in the speed. So let’s start with our topic on how to increase internet speed.

How to Increase Internet Speed Using cmd

1. Increase Internet Speed using cmd

After opening cmd as an Administrator you have to enter the following commands one by one. You can copy the given commands and paste it on the cmd panel.

Netsh int tcp show global and press Enter

Netsh int tcp set chimney=enabled and press Enter

Netsh int tcp set global autotuninglevel=normal and press Enter

Netsh int set global congestionprovider=ctcp and press Enter

If you get a message like the following command was not found (mostly happens on second and fourth command) leave it and move to next command. It is because of the network adapter. If you are using only LAN and you don’t have WiFi installed then this message will appear.

2. Increase Internet Speed by DNS Cache

When a user access to the internet the IP address of every page that the user visit is stored automatically so that user can open that page faster. But Lot of IP addresses on the computer may reduce the speed when the user visits other pages. So if you do not want to visit again on any page you need to flush the DNS cache.

How to Increase Internet Speed using cmd in Windows 10

After opening cmd as an administrator type the following commands in cmd panel.

ipconfig /flushdns and press enter

This command will erase the DNS cache from the computer and it will increase internet speed when you visit a webpage.

3. Increase Internet Speed by “netsh int ip reset”

After opening the cmd as an administrator type the following command in the cmd panel.

netsh int ip reset c:\resetlog.txt and press Enter.

for Windows XP users:

netsh winsock reset all and press enter.

After the command, you need to restart your computer to see the change in the results. The command basically rewrites the computer’s registry keys used for TCP/IP settings.

4. Increase Internet Speed by pings to default gateway

In this method on how to increase internet speed using cmd, you need to ping default Gateway. To do so you need to have the default gateway address.

To know the default gateway enter ipconfig on cmd panel.

Then type ping -t default gateway for eg:- ping -t 192.168.1.1

Now let the ping procedure going on while you surf the internet. It means do not close the cmd window when you are browsing or downloading.

This is the end of the topic how to increase internet speed using cmd. I hope you have found what you were looking. If you like this post keep visiting for more helpful information. Share your opinions with us using the comment section. This methods works on these, How to Increase Internet Speed using cmd in Windows 10, How to Increase Internet Speed using cmd in Windows 7, etc.

Also Read:

LEAVE A REPLY

Please enter your comment!
Please enter your name here