[How to Fix] Xbox One Won’t Turn On But Makes Sound

The Xbox One is a great gaming console that was released back in 2013. Even with the console turning nine years old, it is still being used by a number of players. As long as there are new games for the console, it will continue to be used. While the console is good in every aspect, there can always be issues that can plague its functioning. One of the most common issues out there for the Xbox One is when you try to power it on but all it does is makes the beeping sounds.

So, today, we will be taking a look at how you can fix Xbox One Won’t Turn On but makes sound issue.

Now, this is a very common issue that many Xbox One users have been facing. This can also happen when you might have switched the Xbox off and wanted to use it the next day, only to be greeted by this issue. Well, in all fairness, there are a number of reasons why this issue could occur. If you are someone who has the Xbox One or know someone that has an Xbox One that might have this type of issue, this is the guide that you need to follow.

Fix Xbox One won’t Turn On but makes Sound

Causes for Xbox One won’t turn On but makes Sound

There are a good number of reasons why your Xbox One might run into such an issue. Let’s take a look at what these issues are.

1. Faulty Power Brick and Cables

If your Xbox One has cables that have been damaged or for that matter even third-party ones, there are chances that your Xbox might not power up because of the difference in power being drawn in by the console. The same can be said about using power bricks that aren’t meant to be used with your Xbox.

2. Overheating Console

Xbox One Won't Turn On

Most electronics, when used for a long period of time tend to overheat. This is especially true when your console is in an environment that has dust or is placed in such a way that there is no proper air circulation to cool the console. In this way, the console tends to heat up and for safety reasons, it decides to shut itself down until it reaches its normal operating temperatures.

3. Power Supply Failure

If your Xbox does not switch on when you press the button when it is plugged in, there could be a high chance of the power supply not functioning. The power supply is the main component in the console that draws power to the console so that the console itself as well as other plugged-in components work right away.

4. Motherboard Issues

If there is any type of liquid damage on the motherboard, chances are high that you won’t be able to power up your Xbox. Even if one of the components has been shot internally, the motherboard will be a dead one. In this case, you will have to get your gaming console serviced by replacing the damaged motherboard with a new one. I hope this is not the reason for the issue in your case.

Don’t forget to check: Xbox Game Pass Games – The Complete List (Continuously Updating)

Troubleshooting Methods

Now that you know the many reasons why the Xbox One won’t power up and plays the beeping sound, there are a good number of troubleshooting steps you can follow to solve this particular issue. Let’s take a look at the various steps.

Fix #1: Mash the Eject Button

Xbox One Won't Turn On

Now, this might sound absurd, but it is one of the ways you can try to get the Xbox One to power up. All you need to do is keep pressing the Eject button on your Xbox One. Why mash the eject button? Well, every time you press the eject button, the Xbox is forced to perform the task to eject the disc. This repeated task should eventually tell the Xbox software to switch itself on. You could keep pressing the eject button at least 10 to 15 times. After a  good number of tries, the Xbox should eventually just power up as it should.

Fix #2: Reset Power Supply

No, we do not mean removing the power supply from your Xbox. What we mean by resetting the power supply is you will have to disconnect all cables from the Xbox for 15 seconds or so. After 15 seconds, connect the cables back and now try to switch the Xbox n. It should switch on right away.

Fix #3: Power Cycle the Xbox

Power cycling the Xbox One is quite easy. You can follow these steps to perform a power cycle.

  1. Connect your Xbox to the power source.
  2. Press and hold the power button for at least 10 seconds.
    Xbox One Won't Turn On
  3. The console will now begin to perform a reset right away.
  4. It will also switch itself off.
  5. The LED light on your power brick will change from orange to white in color.
  6. The power cycle is complete when the indicator on your power brick turns to a dark orange color.
  7. Now, switch on your Xbox One, It should power up right away.

Fix #4: Force Restart Xbox One

If you were unable to get the Xbox powered up even after power cycling, it will be time to forcefully restart the Xbox. You can follow the steps mentioned below.

  1. Make sure your Xbox is plugged into the power source.
  2. Now, press and hold the sync, eject, and power buttons together for ten seconds.
  3. After ten seconds have passed, release the eject button.
  4. Once 15 seconds have passed, release all the buttons that you have been pressing.
  5. Finally, hold the power button and long-press the sync button.
  6. Your Xbox One should start up right away.
  7. If it doesn’t power up, press and hold the power button and repeatedly press the sync button. The console should finally power itself up.

Fix #5: Remove All Connected Devices from Xbox

It could also be possible that might be an issue with Xbox not being able to draw enough power to power up all the connected devices. So, all you need to do is power off your Xbox and disconnect all the devices. Once disconnected, wait for a few seconds and then power it up. Your Xbox should normally power up. Once done, you can go ahead and reconnect all of your devices to the Xbox.

Fix #6: Insert a Game Disc into the Xbox

The other way to get your Xbox One fully powered up is by partially inserting your game disc into it. All you need to do is turn the Xbox on and wait till the beeping sound is heard. As soon as the beeping sound begins, insert the disc into the Xbox. It should forcefully power itself up to read the game disc This should work right away or you might have to give it a few tries.

Fix #7: Replace Cables and Power brick

The best you can actually do is to get yourself replacement cables and a power brick. In this way, you can test and see if it actually is an issue with your Xbox or if it simply was the cables being worn out and spoilt.

Fix #8: Switch Output Ports on your TV

Sometimes, there could also be an issue with one of the display ports not working properly. So, disconnect the HDMI cable from your TV and then connect it to any other free HDMI port. The Xbox will usually startup only if it detects a working display. It would also be advisable to check your cable routing and also for any physical damages or loose connections.

Fix #9: Check for Power Cord Pins

The pins for your power supply at the back of the Xbox might either be dirty or could also be bent. Make sure to clean any dust and ensure that your pins aren’t bent. Once both elements have been fixed, your Xbox should power up right away.

Fix #10: Get Motherboard Checked

Due to a problem with the inner liquid cooling system, moisture could build up on the Xbox motherboard at times. This frequently occurs when the Xbox is stored in a cold area and then switched on, or when the game console is in an extremely moist room.

Moisture on a motherboard, no matter how it occurs, can cause a variety of problems, ranging from an entire failure to power on to beeping but not turning on. Furthermore, if moisture on a motherboard is severe enough, it can cause sparking and short circuits.

In the case of liquid damage to the motherboard, consult a technician. If the damage is permanent, they will repair or replace the motherboard.

Fix #11: Replace the Xbox One

If none of the above steps worked for you, it might be that the Xbox needs to get serviced. It is sensible to get the console checked at an authorized service center. Do not try to open up the Xbox if you have no idea of what you are about to do. It could be either the motherboard that has gone bad or the power supply might have failed.

There you have it. Various troubleshooting methods that you can follow to fix the Xbox won’t turn on but make a beeping sound issue. We hope at least one of the methods that have been mentioned above has helped to solve this issue with your Xbox One.

If you have had the same issue and maybe tried a different method that might have worked out for you, please feel free to leave the method used in the comments below.

Also Check:

Explore Stories


Photo of author

Joshua D'souza

Enjoy games, 90's hip-hop, and tech. Loves exploring the infinite world of laptops and food. Every ready to provide assistance in anything that rocks his boat. Will gladly enjoy capturing memories through various lenses. Worked previously at PiunikaWeb as an author and researcher.

3 thoughts on “[How to Fix] Xbox One Won’t Turn On But Makes Sound”

Leave a Comment