Picture this. You have a Vizio smart TV and a movie or a TV show/event you like that is being telecasted immediately. To avoid missing out on the action, you power up the TV immediately. However, for some odd reason, your Vizio Smart TV refuses to turn on. This can be irritating, especially when there’s a program that interests you.
So, if you’re looking for ways to diagnose your Vizio smart TV won’t turn on, you’ve come to the right place.
Before you simply assume that your Vizio Smart TV has gone bad and you plan to swap it for a newer smart TV, it is best to first identify and diagnose the issue, and then based on the results you will get your answer between the TV working perfectly fine or if it’s time to get a new one.
Let’s get started.
Table of Contents
Vizio TV Won’t Turn On? Perform a Soft Power Reset
A Power Reset is a great way to forcefully get your TV to reset itself without losing any sort of data. This helps it clear its RAM and also potentially any bugs that could be causing your Vizio Smart TV to not turn on.
Here are the steps that you need to perform a power reset for your Vizio Smart TV.
- Pull the power plug from your Vizio Smart TV.
- With the cord unplugged, press and hold the power button on your Vizio smart TV.
- Keep the button pressed for 10 to 15 seconds.
- Leave the button after 15 seconds have passed, you need to wait for 40 more seconds before you plug the power cord back into the outlet.
- Now, switch the TV on. Your Vizio Smart TV should power up, have the Vizio logo displayed, and work as expected.
However, if this method does not help you out, you can try the next troubleshooting method.
Perform a TV Remote Power Cycle
If power cycling your Vizio Smart TV didn’t work, it could be possible that your TV remote could be the culprit.
Let’s take a look at the steps needed to power cycle your Vizio Smart TV remote.
- Grab the Vizio remote and slide out the battery cover at the back of the remote.
- Now, inspect the batteries and ensure that they are not damaged.
- If they are damaged simply get them replaced with newer batteries.
- If the batteries are good, simply remove them from your remote.
- Locate the power button on your Vizio TV robot and keep it pressed. The button needs to be pressed for about 30 seconds.
- Now, re-insert the batteries and power up your Vizio Smart TV. The TV should now respond to your remote and power up right away.
If the TV still doesn’t seem to power on, you need to continue with the other troubleshooting methods.
Check for Damaged Cable or Cord
The single cable that powers your Vizio Smart TV could have two things happen to it. Either the cable could have some cuts or could be damaged which could result in the TV not receiving any power.
Also, take a look at the plug. Try to spot if there is any visible damage. Internal plug damages can also result in the TV not receiving any power but could also lead to electric shocks because of a damaged plug.
If either or both items are damaged, consider getting them repaired or replaced. Once you have the plugs and cables replaced, you can simply power up the Vizio Smart TV and see if it works.
Change the Power Source or Outlet
The issue might be the power source as well, if the power source or outlet gets older and not working properly then you can try plugging your TV into another power outlet source. Or to make things even easier, you could simply use an extension cord and plug your TV into it while the extension cord is plugged into a better power outlet.
Electricity fluctuations can also cause the TV to not power up. So don’t give up on your Vizio Smart TV yet.
Check Connected Input Devices
With a lot of additional input devices available for your TV, it is always best to take a look at those devices that are connected to your TV via the HDMI input port. Devices such as streaming sticks, media players, and even gaming consoles need to be powered on before they can be used with your TV.
If these devices are plugged in and not switched on or connected to a power source, you will not find any type of input on your TV screen. Apart from that, checking that you have switched the TV to the right input source also matters.
Bad HDMI Cables and Ports
HDMI Cables are important if you want to have a device’s input to your TV, So make sure that your HDMI cable is intact and has no cuts or harsh bends on it. If there are such visible damages, try to replace the cable with a newer one and then power up your TV. The Vizio Smart TV should power up and function just fine.
Additionally, take a look at the HDMI ports that are present on the back panel of your Vizio Smart TV. If these ports are loose or have visible damage, then you will have to get those ports checked up. For this, you will have to get your Vizio Smart TV checked by the customer service team.
Possible Internal Damage, Weak Power Supply, or Dead Display Panel
Now, if none of the above troubleshooting methods have solved your Vizio Smart TV to power up, it could only mean one thing. The possibility of any of the above-mentioned internal components going bad can be the root cause of your Vizio Smart TV not displaying anything.
In this case, getting your Vizio Smart TV checked by the brand’s authorized technicians is the only solution.
If the repair costs are minimal you can get the TV repaired. However, if the TV’s repair costs are absurd, it is best to get yourself a newer smart TV from any other brand.
Claim your Warranty on your Vizio Smart TV
If your Vizio Smart TV is still under warranty or if you have an extended warranty added to your Vizio Smart TV, the best solution is to simply get the whole TV unit replaced.
This will work fine for those who might be having newer Vizio TV models. However, if you have an older Vizio smart TV model and it simply doesn’t power on, your best bet is to get a new TV from any other brand.
This issue with the Vizio Smart TV just displaying its logo and shutting itself off has been reported by a lot of users out there. So, if you’re looking for a new TV or planning to replace your ailing Vizio TV, it is advisable to look into other TV brands that do not have such type of issues.
The Reasons Why Your Vizio TV Doesn’t Power Up
There can be many reasons why the Vizio Smart TV doesn’t power up.
- Issues with the electricity supply could have damaged the TV power supply unit
- Any damage to the display can cause the internal display components to break and no longer function
- The TV was in the middle of a software update and lost power hence causing the TV to be completely dead.
This concludes the guide on everything you need to know about how you can solve the issue with your Vizio Smart TV not powering up. Apart from the troubleshooting methods, knowing the reasons that could cause such an issue to your Vizio Smart TV is equally important.
We hope this guide has helped you solve the issue or has helped you make the sensible choice of picking out a smart TV from a brand that can rectify issues, have solutions, and above all ensure that such issues do not happen on a large scale.
If you have additional troubleshooting options fixing Vizio TV Won’t Turn On that have worked for you, feel free to share them in the comments section below.
Related Articles:
