If you have experienced the annoying experience of your Element TV not turning on, you’re not alone. Many TV owners have this problem, which can be caused by a number of circumstances. In this guide, we will look into the most prevalent causes of this issue and provide step-by-step solutions to fix the problem of Element TV not turning on.
Since technology is constantly growing, it can be quite annoying when a device fails to function properly. Several people turn to television for a break and to relax after a long day at work, and it can be quite disappointing to discover that your Element TV failed to turn on.
The primary question you’ll definitely ask is, “Why is my Element TV not turning on?” Issues do happen from time to time, but they are usually fixable. Today, we have added different troubleshooting fixes to try if your Element TV not turning on.
Table of Contents
Why is My Element TV Not Turning On?
There could be a number of reasons why your Element TV not turning on, some of which are as follows:
- It’s likely that an electrical problem caused damage to your TV’s power supply, preventing it from turning on.
- There is a possibility that your Element TV’s power cable is faulty.
- Source or outlet malfunctions.
- Weak or dead batteries can prevent the remote from efficiently sending signals.
- Amongst others.
How to Fix Element TV Not Turning On
Now that you’ve identified a probable cause, let’s look into various solutions to fix the Element TV not turning on.
Check the Power Supply Circuit
The first thing you need to check if your Element TV not turning on is to make sure it’s getting electricity from the wall. Most of the difficulties are caused by a severed or loose cord or a shorted wall socket, which may surprise you. A quick but comprehensive inspection can save you money and time.
Check to see if the wall socket is giving the necessary current. You can plug in another appliance or device and check if it’s working or not. If it’s not working, then the issue is in the power circuit. If it’s working, move on to the next fix.
Check the Wire
The cord that supplies electricity to your television might occasionally malfunction or break. If the wire is broken, kinked, or just worn out, it will stop transmitting electricity from the socket to your Element television.
It will trigger the TV to behave as if it is off, and it doesn’t work properly. To fix this problem, you’ll need to buy a new power cord and replace it.
Another method you can try to solve the problem of your Element TV not turning on is to power cycle your television. Power cycling means simply switching your television off and on again. However, unlike a straightforward On and Off, we need to drain the circuit of any remaining electrical charge during the operation so that the system restarts cleanly. Here’s how to go about it:
Step 1: Unplug the television cord from the wall outlet.
Step 2: Wait for about 60 seconds, then hold down the power button for about 30 seconds.
Step 3: Connect your TV’s cord and turn it on.
Once you do, it will drain all the capacitors off their stored charge, reset the device to its zero state, and reboot the TV into its fresh state.
Check and Replace Remote’s Batteries
Although this sounds obvious, a lot of individuals will search outside for the issue when it is actually the batteries that are dead.
Hence, try replacing the batteries with the new ones and checking whether the issue is resolved or not. Make sure to avoid combining old and new batteries, as this will cause further issues due to variations in cell voltages.
Check and Unblock That Signal
Sometimes, your Element TV will not switch on since the signal from the remote is blocked. It might occur if the television is set on a stand with a lot of things around it that are covering the signal. It’s possible if the TV is wrapped behind something or if something is placed in front of the TV.
Hence, cross-check for things and move whatever appears to be blocking the TV’s view, and then try to turn it back on, and your issue should be fixed.
Reset the TV
Electronic devices may occasionally malfunction for no obvious reason. If you are unsure, it is usually an excellent decision to reset your television to factory settings. On some TVs, a button on the back can be pressed for about 30 seconds to reset the TV.
On other TVs, however, you must press certain buttons in a precise order to reset the TV. You can check our dedicated guide on how you can reset your Element TV or check the manufacturer’s website to get the instructions for resetting your TV.
Use The TV Button
Another thing you can do to fix the problem of the Element TV not turning on is to try pressing the hardware button. For the unaware, there are two power controls that you may use to turn your TV on.
The first is on the remote, and the other is on the side panel of your television. Try hitting the power button on the TV and waiting for a few moments to see if it turns on or not.
If it fails to work, unplug the power adapter for 5 seconds while holding the power button, and then plug it back in.
That is supposed to be enough to turn off your TV, and pressing it again should turn it back on. If the situation persists, you may be dealing with a hardware issue that cannot be resolved.
Conclusion: Element TV Not Turning On
To summarize, a non-responsive Element TV can be annoying, but with the appropriate methods for troubleshooting, you can easily resolve the issue and get back to enjoying your television. Try to be proactive in taking preventive steps to reduce potential problems. If all else fails, don’t be afraid to seek professional assistance to get your Element TV back up and running.